Description
This low-salt Davey ChloroMatic Nipper combines strong chlorine production with the comfort of reduced pool-water salinity. Producing up to 25 grams of chlorine per hour, it is suitable for residential in-ground and above-ground pools up to 100,000 litres in cooler climates.
The system can operate from just 1,500ppm salt, making it suitable for low-salt and compatible mineral pools. Its digital controller, independent timers and intelligent operating modes provide flexible pool management, while the reverse-polarity cell helps reduce calcium scale accumulation.
Key Features
- 25g/hr chlorine output for medium to large residential pools.
- Low-salt operation from 1,500ppm for reduced pool-water salinity.
- Salt and mineral compatible across an operating range of 1,500–6,000ppm.
- Reverse-polarity cell helps minimise calcium scale accumulation.
- Adjustable output in 5% increments for accurate chlorine control.
- Two independent timers provide flexible daily filtration schedules.
- Digital LCD display clearly shows settings, operating status and alarms.
- Add Salt, Low Salt and Low Flow alarms help protect the chlorinator.
- Integrated safety flow switch stops chlorine production if adequate water flow is not detected.
- Battery backup protects programmed settings during power interruptions.
- Energy-efficient switchmode power supply in a UV-stabilised enclosure.
- 36-month manufacturer warranty for added peace of mind.
Pool Sizing Guide
| Climate | Maximum Recommended Pool Size |
|---|---|
| Cool climate | Up to 100,000L |
| Hot or tropical climate | Up to 60,000L |
Intelligent Operating Modes
- Boost Mode: Runs at maximum output for 24 hours following heavy swimming, contamination or extreme weather.
- Cover Mode: Reduces chlorine production while the pool is covered.
- Spa Mode: Reduces output for smaller water volumes.
- Winter Mode: Reduces cell output during periods of lower chlorine demand.
Technical Specifications
| Model | DNP25CLS |
|---|---|
| Chlorine Output | 25g/hr |
| Chlorine Produced Over 8 Hours | 200g |
| Operating Salt Range | 1,500–6,000ppm |
| Cell Type | Low-salt reverse-polarity electrolytic cell |
| Chlorine Adjustment | 5% increments |
| Timers | 2 independent timers |
| Maximum Power | 0.24kW |
| Electrical Supply | 220–240V, single phase, 50/60Hz |
| Enclosure Rating | IP34 |
Complete System Includes
- Digital low-salt controller and power supply with cell lead
- U-shaped cell housing and low-salt reverse-polarity cell
- Integrated safety flow switch
- Cell blanking cap and O-ring
- Two barrel union assemblies and reducing bushes
- Power lead, mounting hardware and quick reference guide
Pool sizing is a guide only. Actual requirements depend on climate, water temperature, pool use, sunlight, filtration runtime and water chemistry. The correct salt concentration must be maintained to protect the electrolytic cell.

![Davey Chloromatic Nipper 25g LOW SALT Chlorinator [DNP25CLS]](http://www.partsforpools.com.au/cdn/shop/files/00ab1f7b-512e-42a9-b85b-e98284d9c39f.jpg?v=1785802331&width=1000)
![Davey Chloromatic Nipper 25g LOW SALT Chlorinator [DNP25CLS]](http://www.partsforpools.com.au/cdn/shop/files/07bf0932-d522-48d2-b6a3-65a8c7085bd6.jpg?v=1785802331&width=1000)
![Davey Chloromatic Nipper 25g LOW SALT Chlorinator [DNP25CLS]](http://www.partsforpools.com.au/cdn/shop/files/bd837c11-c1e0-4fe6-9da2-8cb955734b02.webp?v=1785802331&width=988)